Pro-tech Aluminum Saw Blade Tct 260x2.4x30x68t (PT26068-30AL)

Pro-tech Aluminum Saw Blade Tct 260x2.4x30x68t (PT26068-30AL)

Saw blade terminology:

Arbor:
The shaft that turns the saw blade.

Alternate Top Bevel.
The tips on the saw blade bevels from left to right in sequence. Each tip has a sharp point that result in a clean, shear cut leaving a fine finish with minimal chipping.
For use in plywood, veneer, particle board and wood.

Anti-kickback:
The gullet is shaped like a camel's hump, also called a limiter, to limit the amount of material that can safely be cut by each tooth.

Bore:
The center hole diameter of the saw blade.

Combination:
Circular saw blades that can be used both for crosscutting and ripping.

Crosscut:
A cut made across the grain of the wood. Cutting wood to length.

Depth of cut:
The maximum depth of cut safely achievable determined by the power tool and saw blade diameter.

Diameter:
The outside of the saw blade measured directly across from one tip to the other opposing tip.