AirCraft Three Stage Filter (Sinter / Fine/ Carbon) Without Gauge (SG AC6003)

AirCraft Three Stage Filter (Sinter / Fine/ Carbon) Without Gauge (SG AC6003)

1. Sinter Filter

• Purpose: Removes larger particles and debris.
• Material: Typically made of sintered metal or ceramic.
• Function: The porous structure of the sinter material traps larger particles, preventing them from passing through to the subsequent filters.

2. Fine Filter

• Purpose: Removes smaller particles and contaminants.
• Material: Often made of a woven or nonwoven material, such as fiberglass or polyester.
• Function: The fine mesh of the material captures smaller particles that were not removed by the sinter filter.

3. Carbon Filter

• Purpose: Absorbs gases, odors, and volatile organic compounds (VOCs).
• Material: Activated carbon, a highly porous material with a large surface area.
• Function: The carbon particles adsorb various contaminants, effectively purifying the air or liquid.

Application:

• Solvent-based paints
• Breathing protection equipment
• Automotive
• Waterborne, paint spray guns
• DIY
• Removes oil and water (Sintered filter)
• Removes micro dirt (Fine filter)
• Removes oil steam and smells (Activated charcoal filter)
  
  

SPECIFICATIONS:

Material:

• Housing: Aluminium alloy

Air Flow:

• Air Flow: 70 cfm (2000L/min)

Filtration:

• Sintered Filter: 5 μm
• Fine Filter: 0.01 μm
• Activated Charcoal Filter: Oil vapors

Air Inlet and Outlets:

• Air Inlet: G1/2" female thread
• Air Outlets: G1/4" male thread

Temperature:

• Maximum Operation Temperature: 60°C

Content:

• 1 x Three stage filter
• 1 x Air pressure regulator (Without Gauge)
• 2 x Ball valve G 1/4"M